USB mixer · Xone
How to Record an Allen & Heath Xone:43C (or Xone:96) Over USB
The Xone:43C appears as a USB audio interface. Pairs 1–4 are not the master. They are the four rear deck sockets, before the faders, so a DVS box can hear the vinyl. Record “USB 1–2” in Audacity and you get Deck 1 pre-fader — not the mix. Loop REC OUT into an unused line, or on a Xone:96 record USB 11–12. Boothkeep’s live meter in the input menu shows which pair is carrying the set before you press Record.
Why USB pairs 1–4 are empty of the mix
Allen & Heath wired the 43C’s USB sockets as four stereo DVS returns. Pair 1 is the Channel 1 PHONO/LINE input, pair 2 is Channel 2, and so on. Those paths sit before the EQ, the filter, and the fader. Serato or Rekordbox needs that dry feed to lock the needle. The master, the booth, and REC OUT stay analogue. Nothing on USB is the post-fader mix unless you put the mix there yourself. That is why a two-hour take of “Deck 1” is one record, at one level, with no blends.
The REC OUT loop on a Xone:43C
REC OUT on the rear is a post-mix RCA pair with headroom left for two-deck transitions. Run those two RCAs into an unused line channel — Channel 4 if you are playing three decks, Channel 3 if you only need two. Set that channel to LINE. Leave its fader down, or keep it out of the master, so the loop does not re-enter the mix and howl. USB still hears that channel’s pre-fader input, which is now the master. Record that stereo pair. Do not record pairs 1–4 unless you want isolated decks.
Xone:96: USB 11–12 is already the record pair
The 96 exposes more USB channels. Pairs 1–8 are still the deck and return paths. USB 11–12 is the record / master send — the same signal as REC OUT, already on the interface. No loop. Pick 11–12 and record. If 11–12 is silent, the USB record send is not assigned in the mixer’s USB menu; set it to the mix, then check the meter again.
Steps
Do it in order
Step 1
Plug the mixer in over USB
A class-compliant Xone needs no extra driver. It appears with the other audio inputs. If Allen & Heath ships a driver for your OS, install that first. Quit Serato or Rekordbox if either of them is holding the device — one program can own the mixer.
Step 2
Loop REC OUT on a 43C, or open USB 11–12 on a 96
On a 43C, REC OUT L/R into an unused LINE channel, fader down. On a 96, skip the cables and use USB 11–12. Confirm the looped channel is not feeding the master, or the booth will double and then feed back.
Step 3
Watch the per-pair meter before Record
Open Boothkeep’s input menu. Each stereo pair shows a live level. Play a record. The DVS pairs jump when that deck is open. The looped pair (or 11–12) should show the whole mix — both decks, the filter, the master. If that pair is flat, the loop is on the wrong channel or the 96 send is not assigned.
Step 4
Record that pair
Select the pair that has the mix. The preview meter runs before Record. Press Record. The take is 24-bit WAV, AIFF, or FLAC on this computer. Cue can sit on another output; the recording stays locked on the pair you chose.
Questions
Before you record
Why does Audacity only record Deck 1?
Audacity’s default device channel is usually USB 1–2. On a Xone:43C that is Deck 1, pre-fader. The master is not on that pair. Loop REC OUT and record the looped pair, or switch to USB 11–12 on a 96.
Can Serato stay open?
One program holds the mixer. Quit the DJ software, or record a pair it is not using. Boothkeep does not replace Serato. It records the USB audio.
Will the looped channel howl?
Only if that channel is in the master. Leave its fader down, or take it out of the mix assign. USB still hears the pre-fader line input.
Does this work on Mac, Windows, and Linux?
Yes. The routing is in the mixer. Boothkeep lists whatever the OS already sees. Version 0.2.6 is the same app on all three.
Record the set on this computer
Boothkeep is £19 once for Mac, Windows, or Linux. The trial records for 3 minutes. The take never leaves the machine.
More guides
Same booth, next job
Why Your Recorded DJ Mix Sounds Too Quiet (and How to Level It to −14 LUFS)
REC OUT and internal recorders leave 6–12 dB of headroom, so peak normalize in Audacity stays quiet. Boothkeep rides the take to −14 LUFS with a two-pass BS.1770 limiter.
How to Generate a Timed Tracklist from a Recorded DJ Set (Even with Pitched Edits & Vinyl)
Cloud recognizers miss pitched club mixes and unreleased dubs. Boothkeep matches your folder ±14%, imports Serato or Rekordbox, and IDs vinyl from a 12-second clip.
How to Turn a Serato Session or Rekordbox XML into YouTube Chapters and a Mixcloud Upload
Import a Serato session or Rekordbox XML into Boothkeep, audit blends on the waveform, then copy YouTube chapters or upload a 320 kbps MP3 to Mixcloud.
How to Cue a USB Mixer in Headphones on Mac, Windows, or Linux (Plus OBS Now-Playing)
Cue a USB mixer in headphones on Mac, Windows, or Linux without a room mic feeding back, and feed now-playing.txt into OBS while you record.