CryotexLabs

Cue · OBS

How to Cue a USB Mixer in Headphones on Mac, Windows, or Linux (Plus OBS Now-Playing)

Late-night recording does not need the booth monitors. Route the USB mixer into Boothkeep, send cue to a separate headphone output, and keep room microphones off so the speakers — if they are even on — never come back down the take. The same set folder gets a live `now-playing.txt` for OBS.

Two devices, one job each

The mixer USB is the input. Headphones are an output. They do not have to be the same interface. Record stays locked on the stereo pair you chose — the looped REC OUT, USB 11–12, or whichever pair is carrying the set. Cue can move to the Mac headphone jack, a USB dongle, or outputs 3–4 on another interface. If cue and record share one pair, you will hear the take and record the take; that is fine until you want a different headphone mix. Split them when the computer’s output is not the booth.

Why a room mic turns into echo

The OS lists every input: the mixer pairs and the built-in microphone. Pick the mic, or leave “default input” on a laptop that is sitting in front of speakers, and the room comes back a few milliseconds later. That is the echo. Boothkeep refuses a room microphone as the record source so that path is closed. Speakers can stay off. If they are on, they are not being recorded through the laptop mic.

now-playing.txt for OBS

Each take folder gets a `now-playing.txt` that updates as the current row changes. In OBS, add a Text source that reads from a file and point it at that path. The overlay follows the set without a browser source or a cloud now-playing service. The file is plain text. You can style the source in OBS — font, colour, outline — the same as any other text.

Steps

Do it in order

  1. Step 1

    Pick the mixer pair that has the mix

    Open the input menu. Use the live meter. The pair with the set is the record source. Do not pick the built-in microphone, even if it is first in the list.

  2. Step 2

    Move headphones to another output

    In Boothkeep, send cue to the jack or device you are wearing. The recording does not follow that move. You can change headphones mid-take. Mac, Windows, and Linux all list the outputs the OS already knows.

  3. Step 3

    Confirm the room mic is blocked

    If the laptop lid is open and monitors are up, the refusal on the microphone is what stops the echo. Keep the record source on the mixer pair. If you hear the room, you are not on that pair.

  4. Step 4

    Point OBS at now-playing.txt

    Add a Text (FreeType / GDI+) source. Read from file. Browse to the set folder and `now-playing.txt`. Enable the “read from file” refresh. Start the take. The overlay updates when the current track does.

Questions

Before you record

Can I just use the mixer’s headphone socket?

Yes. That is the booth cue. Use the computer headphones when you want to hear the recording path — the pair Boothkeep is actually writing — or when the mixer phones are already serving the DJ cue.

Why did I get echo on a laptop?

The record source was a microphone in the same room as the speakers. Boothkeep blocks that input. Pick the USB pair again if the OS reset the default after a replug.

Does now-playing.txt need a license?

The file is written with the take. The trial can still cue, mark, and play back. Full-length recording and the Mixcloud upload sit on the £19 license.

Mac vs Windows vs Linux?

Same app. The Mac installer is signed and notarized. Windows may show SmartScreen on the first launch. Linux wants ALSA plus X11 or Wayland. Cue routing uses whatever outputs those systems already expose.

Record the set on this computer

Boothkeep is £19 once for Mac, Windows, or Linux. The trial records for 3 minutes. The take never leaves the machine.

More guides

Same booth, next job