CryotexLabs

Loudness · −14 LUFS

Why Your Recorded DJ Mix Sounds Too Quiet (and How to Level It to −14 LUFS)

A USB take from REC OUT is supposed to sound quiet. Mixers leave 6–12 dB of headroom so a two-deck transition does not clip the recorder. Peak normalize in Audacity then hits that one hot blend and stops. The rest of the set stays down. Boothkeep rides the file to −14 LUFS with a two-pass streaming BS.1770 meter — a 3-second window, a 6-second glide, and a −1 dBTP true-peak limiter — so gain creep and quiet vinyl come up without squashing the kick.

Why REC OUT is quiet on purpose

REC OUT, and the record buses on a Xone, a Pioneer, or a DJM, are padded. Two faders up, a filter sweep, and a drop can add 6 dB in a bar. The pad is there so that peak does not write digital clip into the take. Club mixes are also balanced for a booth and a system, not for a phone speaker. Streaming loudness sits around −14 LUFS integrated. A raw recorder file often lands at −20 to −26. That gap is the “too quiet” you hear on Mixcloud.

Why peak normalize does not fix it

Audacity’s Normalize looks at the tallest sample. One two-deck transition, one clipped kick, or one FX return that kissed 0 dBFS becomes the ceiling. Everything else — a quiet vinyl opener, a dipped bassline, the last hour after you rode the master down — stays where it was. You have not evened the set. You have locked the one hot moment and left the rest 8 dB down. A single-band compressor on the whole file then eats the kick to chase the quiet parts.

What −14 LUFS and −1 dBTP actually do

BS.1770 measures loudness the way hearing does, over time, not the tallest peak. −14 LUFS integrated is what YouTube, Spotify, and Mixcloud already expect; files louder than that get turned down, files quieter stay quiet. True-peak (dBTP) is the reconstructed peak after the DAC and after lossy encode. A −1 dBTP ceiling leaves room for the MP3 so the upload does not clip on Mixcloud. Boothkeep writes the 320 kbps MP3 from the leveled file, not from the raw take.

Steps

Do it in order

  1. Step 1

    Record the mix, not a padded guess

    Leave the mixer’s record pad where it is. Do not slam REC OUT to make the meters look “hot.” Capture the headroom. Boothkeep records 24-bit, so the quiet parts are still there.

  2. Step 2

    Stop the take and let the two-pass ride run

    When you press Stop, Boothkeep measures the file with a streaming BS.1770 meter, then rides gain toward −14 LUFS. The analysis window is 3 seconds. The glide is 6 seconds, so a dropped-in quiet record comes up and a hot blend goes down without pumping on every kick. A −1 dBTP true-peak limiter sits at the end of the ride.

  3. Step 3

    Play the leveled file, not the raw peaks

    Tracks can play the raw take or the leveled file. Use the leveled file to check the ride. A vinyl opener should now sit with the USB tracks. A two-deck peak should no longer be the only loud bar. The kick should still have weight — the ride is loudness, not a clipper on every transient.

  4. Step 4

    Upload the 320 kbps MP3

    The MP3 is written beside the leveled file. That is the file for Mixcloud or YouTube. Do not upload the raw WAV and hope the host “fixes” it. They will turn a hot file down and leave a quiet file quiet.

Questions

Before you record

Will this squash the kick drums?

The ride is a slow loudness glide, not a drum compressor. A 6-second window will not duck every kick. The limiter only bites true peaks above −1 dBTP. If a take is already slammed into the record bus, there is nothing left to save — record with the pad next time.

Why not just normalize to −1 dB in Audacity?

That is peak normalize. One hot transition sets the gain for the whole set. Loudness normalize to −14 LUFS moves the average, then a true-peak limiter catches the leftovers. That is the difference between a quiet mix with one loud blend and a set that plays at the same level as everything else on the platform.

Is leveling in the trial?

The trial records for 3 minutes. A £19 license unlocks the full length, the −14 LUFS ride, and the 320 kbps MP3. The recording stays on that computer.

What about gain creep across vinyl and USB?

Vinyl is often several dB down from a digital track. If you ride the master to match, the recorder sees that ride. The BS.1770 pass evens those sections after the fact, so you do not have to pin the master at one number all night.

Record the set on this computer

Boothkeep is £19 once for Mac, Windows, or Linux. The trial records for 3 minutes. The take never leaves the machine.

More guides

Same booth, next job